Call: Mark 07515-687740

E-mail: mark@vaillantservice.co.uk

vaillantservice.co.uk

I   Main Home Page   I   Servicing Area   I   General Information   I   New Boilers   I   Technical Help Area   I

Self Help   I   Blocked Heat Exchangers   I   Hot Water Problems   I   Fault Codes   I   Identify Your Model   I   Ecotec Faults   I   F.75 Code   I   Turbomax Faults   I   Ecomax Faults

Ecomax PRO 18E / 28E

F.01 Code: Red Neon Lit.?

Defective ignition, electrodes,

or chamber seals leaking.

Normal ‘Operation’ display.

Green neon lit..

Other Codes / Faults:

No display:

Fan Failure, Gas Valve, PCB, or no power..

Leaking condensate collector:

Replace. or horrific damage to chassis

Blocked Heat Exchanger:

F.05 and noisey...

Remedy..... COMMIT SUICIDE.!

Ecomax 824/828/1

There are no coloured neons on the ECOMAX.

The operation mode is displayed in the LCD screen

The fault codes are fairly accurate on the Ecomax, use the user instructions for guidance.

Reset by holding in the ‘reset’ button for a couple of seconds, and release..

Warning!

It is a criminal offence to work on a gas appliance if you are not qualified, and licensed to do so.

ALWAYS consult the manufacturers user instructions for guidance. The instructions above are for guidance only. If unsure of any procedures, call a boiler specialist, who holds the relevant qualifications, and GAS Safe Registration.